PyroSigma
PyroSigma infrared sensor with display
Specifications
Small low-cost industrial infrared temperature sensor up to +1000°C. Fully configurable for averaging, hold processing, emissivity, output scale etc. with display. |
Temperature range | 0 to 1000°C |
Temperature output | Voltage: 0-5 V DC or 0-10 V DC output, linear with measured temperature, rescalable |
Alarm output | Open collector alarm output with temperature threshold and hysteresis, configurable |
Note: Alarm and temperature outputs may be used simultaneously | |
Field of view | 15:1 (see Field of View Diagram) |
Accuracy | ± 1.5% of reading or ± 1.5°C, whichever is greater |
Repeatability | ± 0.5% of reading or ± 0.5°C, whichever is greater |
Response time | 125 ms (90% response) |
Configuration | Via built-in display and controls |
Emissivity setting | Adjustable 0.2 to 1.0 |
Max. Temperature span (Voltage output) | 1000°C |
Min. Temperature span (Voltage output) | 100°C |
Spectral range | 8-14 μm |
Max. Supply voltage | 28 V DC |
Min. Supply voltage (at sensor) | 12 V DC (for 10 V output) |
6 V DC (for 5 V output) | |
Max. Current draw | 6 mA |
Configurable parameters | Temperature range for voltage output Output voltage range and scale Alarm output threshold and hysteresis Emissivity setting Reflected temperature Signal processing (see below) |
Temperature units | °C / °F |
Signal processing | Averaging Period (0.125 to 60 seconds), Peak / Valley Hold Mode, Hold Period (0.125 to 120 seconds) |
Construction | Black anodised aluminium and blue ABS |
Cable length | 1 metre standard (longer lengths available to order) |
Weight with 1 metre cable | 65 g |
Environmental rating | IP65 |
Ambient temperature range | 0°C to 70°C |
Relative humidity | 95% max. non-condensing |
Customisation possibilities
You can remark the customisation in your quote
Productcode | PyroSigma |
---|---|
… |