Infrared temperature sensors for use between -20°C and 500°C
Specifications
The PyroCouple is a simple, robust infrared temperature sensor with a choice of analogue outputs. No complicated setup is required - just connect a temperature indicator and power supply, and instantly start taking measurements. | |
It is suitable for non-contact temperature measurement on most non-reflective non-metal surfaces, such as paper, thick plastics, asphalt, painted surfaces, food, rubber and organic materials, among many others. |
Temperature range | -20°C to 100°C (LT models) |
0°C to 250°C (MT models) | |
0°C to 500°C (HT models) | |
Optics | Choice of optics for small or large targets at short or long distances - see Field of View Diagrams |
Output (measured temperature) | Two-wire 4-20 mA (-0 models) |
0-50 mV (-1 models) | |
Type J Thermocouple (-3 models) | |
Type K Thermocouple (-4 models) | |
Output (sensor body temperature) | 4-20 mA on power loop (models with output options 1 to 4 only) |
Accuracy | ±1% of reading or ±1ºC, whichever is greater |
Repeatability | ± 0.5% of reading or ± 0.5ºC, whichever is greater |
Emissivity | Fixed at 0.95 |
Response time, t90 | 240 ms (90% response) |
Spectral range | 8 to 14 μm |
Supply voltage | 24 V DC (28 V DC max.) |
Min. sensor voltage | 6 V DC |
Max. loop impedance | 900 Ω ( 4-20 mA output) |
Output impedance | 56 Ω (voltage/thermocouple output) |
Construction | Stainless steel |
Dimensions | 18 mm diameter x 103 mm long |
Thread mounting | M16 x 1 mm pitch |
Cable length | 1m (longer lengths available to order) |
Weight with cable | 95 g |
Environmental rating | IP65 |
Ambient temperature range | 0ºC to 70ºC |
Relative humidity | 95% max. non-condensing |
Air purge collar | |
Fixed mounting bracket | |
Adjustable mounting bracket | |
Air/water cooled housing | |
Laser sighting tool | |
Dual laser sighting bracket |
Customisation possibilities
You can remark the customisation in your quote
Productcode | |
---|---|
… |