AOIP CALYS 50 Multifunktions-Feldkalibrator
Specifications
| CALYS 50 ist ein grundlegender Multifunktionskalibrator innerhalb der CALYS-Reihe. Es ist das perfekte Werkzeug für die erweiterte Prozesswartung und den Einsatz auf Prüfständen in allen Branchen. Es ist für alle Feld- und Labormessungen geeignet und kann über zwei isolierte Kanäle gleichzeitig verschiedene Signale von Temperatur, Widerstand, Prozess und Frequenz in einem einzigen Instrument messen und erzeugen. | |
| Es bietet erweiterte Funktionen (Temperatursimulation, Skalierung, Schritte, Synthesizer, statistische Funktionen usw.), auf die über Schnellmenüs nach Funktionen leicht zugegriffen werden kann. | |
| The instrument simultaneously measures and simulates: | Temperature: Up to 0,014% RDG |
| Resistance: Up to 0,012% RDG, 4 KΩ range | |
| Current: Up to 0,0175% RDG, 50 mA range + 24 V loop supply | |
| Voltage: Up to 0,013% RDG, 50 V IN / 20 V OUT range | |
| Frequency: Up to 0,005% RDG, 20 KHz range (10 KHz in simulation) |
| RTD sensors | Pt50, Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni1000, Cu10 or Cu50 |
| Thermocouples | K, T. J, E, R, S, U, B, L, C and N |
| DC current | 0-50mA |
| DC voltage | 100mV-50V |
| Frequency | 20kHz |
| Resistance | 400Ohm, resolution 1 mOhm |
| 400Ohm, resolution 10 mOhm | |
| DC current emission | 0-24mA |
| DC voltage emission | 100mV-20V |
| Frequency emission | 1000Hz-10kHz |
| Resistance emission | 40-4000Ohm |
| Connection | Connect your probes by simply pushing on the terminal top and insert wires of up to 3 mm or 10 AWG diameter and compensated thermocouple connectors. |
| Wires are held tight between two brass plates ensuring thermal stability and a very good cold junction compensation for thermocouples. | |
| This system also enables 4 mm banana plugs and security connectors to be connected on the terminal top. |
| Size | 210 x 110 x 50 mm |
| Weight | 900 g |
| Display | 240 x 320 pixel liquid crystal graphical display with backlite and contrast control Display of result as table of values or trend curve |
| Power supply | 230 V ± 10 %, 50/60 Hz |
| Battery | Type: Lithium-ion, Charging Time: 3 hours, Lifetime: 8 hours |
| Communication ports | USB |
| Reference range | 23°C ± 5°C (RH: 45 to 75 % w/o condensing) |
| Operating reference range | -10 to 50°C (RH: 20 to 80 % w/o condensing) |
| Limit operating range | -15°C to +55°C (RH: 10 to 80 % w/o condensing) (70% at 55°C) |
| Storage temperature limits | -30°C to +60°C |
| Maximum height | 0 to 2000 m |
| IP protection | IP54 according to EN60529 |
| User manual | |
| Battery charger | |
| Set of 6 testing leads | |
| Carrying strap | |
| Factory test report |
Customisation possibilities
You can remark the customisation in your quote
| Productcode | |
|---|---|
| … |